No one likes to have dirty tiles and grout. The nice thing is that tile and grout cleaning is really not that time consuming. Learns the best methods for tile and grout cleaning and being able to use the right tile grout cleaner should cut down significantly the time it takes you to clean. In addition, this should also make the process more enjoyable for you.
1)Carefully analyze the situation. How bad is it? Where should I start? When cleaning tile in the bathroom or kitchen, I normally start by sweeping the tiled floors. Then next thing I do it to get them wet by applying a grout cleaner mixed with water. For medium and small jobs, this is best accomplished using a spray bottle.
2)After spaying the tile and grout cleaner, allow the cleaner to soak in for about 10 to 15 minute. These makes it a lot easier to clean later on. This not only disinfects the area, but it helps to loosen up the dirt and grim and it also helps to remove the grout stain out of the grout.
3)After about 15 minutes, use a scrub brush to clean out the stain out of the grout. If it does not easily come out after scrubbing, spay it again and let it sit for another 15 minutes. Sometimes, mildew grows very deeply into the grout and it can take some time for the mildew stains to come out.
4)The next step is to rinse the grout an tile with water and then to dry them off. For large areas, you may also consider getting a grout steam cleaner. This uses vaporized steam to preswsurize and clean out the porous surfaces of the water. Most use low water vapor content, which keeps moisture from getting traps. These machines are affordable and start around $110 .
Related posts: